To ensure optimum cutting quality we recommend a more powerful extraction system for industrial application. The extraction system has an 8" opening to enable a quality cutting edge and clean environment.
This rotary chuck is specifically designed for the T500 to enable you to work with syndical objects. The rotary chuck can work with a 4" or 6" focus lens. The diameter range of the to-be-engraved object is 0.5mm to 120(4" lens) / 80(6" lens) mm and the max. length of the object is 900mm for 4” lens and 840 mm for 6” lens. Its maximum weight should not exceed 4kgs.
GCC PA-1500FS & PA-1000FS, CE-certified fume extraction systems, are designed to remove hazardous fumes and dust during laser processing to protect the health of operators, eliminate environmental pollution and enhance laser engraving and cutting.
The extension table allows for you to work with bigger materials. So the work area will go from 51" x 35" (1300 x 905mm) and it will extend by 51" x 23.6" (1300 x 600mm) in the front and rear sides. Therefore the end result will be 51" x 59" (1300 x 1500mm) in total.