×

Call Us: 866-4-LAZERS (SALES)
Support: 951-496-3710

Spirit GLS Hybrid

Drivers

Spirit GLSH Firmware 1.01-08 for MB 5272. To see what Main Board is in your machine Press F4 and go to Information, Press Enter, Press Down Arrow, and look under Board.
Download

Spirit GLSH Firmware 4.02-02 for MB 5272 V2. To see what Main Board is in your machine Press F4 and go to Information, Press Enter, Press Down Arrow and look under Board.
Download

Spirit GLSH Print Driver 1.04.01. See Instructions below on how to install the driver and configure the USB or Ethernet connection.
Download

Instructions

How to set Origin with the Red Beam as a reference
Download

How to set Origin with Calipers. Only use Red Beam method if you do not have calipers for precision measurement.
Download

Instructions on how to install and configure your LaserPro Print driver, and USB port connection.
Download

Instructions on how to install and configure your LaserPro Print driver when connected via Ethernet port connection.
Download

Spirit Series User Manual (V15) Do not operate machine without reading complete manual.
Download

Movies

Instructions for proper cleaning of the Mirrors and Lenses. Remember there are 4 mirrors, at least 1 Focus lens, and an optic on the end of the actual laser. The red beam mirror requires no special attention and is not counted as one of the above 4 mirrors. The mirrors are gold plated silicone and should be treated very carefully to avoid damage. The only way to damage a laser optic is by not cleaning when dirty, or by cleaning improperly.
Download

How to use the Rotary Attachment using Center Home. Part 1 the Software setup portion.
Download

How to use the Rotary Attachment using Center Home. Part 2 the Hardware setup portion. Your model may be different then shown, but the instructions are the same for all models.
Download