×

Call Us: 866-4-LAZERS (SALES)
Support: 951-496-3710

Mercury

Drivers

Mercury II 64 bit Print Driver v3.06-01. For Windows 7 or older. There is no Windows 8 driver for Mercury II.
Download

Mercury II 32 bit Print Driverv3.72-01. For Windows 7 or older. There is no Windows 8 driver for Mercury II.
Download

Mercury Print Driver v3.58. For 32 Bit Windows 7, or older versions of Windows. There are no 64 bit driver available for the original Mercury.
Download

Mercury Firmware for Coherent based laser v2.27-01.
Download

Mercury Firmware for Synrad based laser v2.27-01.
Download

Mercury 100 watt Water Cooled Firmware
Download

Mercury II Firmware version 1.16-02. Unzip to C drive. The file will make a folder called LaserPro. Inside will be PDF instructions, the upgrader utility, as well as the firmware. DO NOT INSTALL ON ORIGNAL MERCURY
Download

General Software and Utilities

Upgrader – Mercury
Download

Instructions

Manual Focus Tool Chart
Download

Mercury User Manual
Download

Mercury Tickle Settings
Download

Mercury Beam Alignment
Download

Mercury X and Y Flag CorelDRAW File
Download

Mercury X Flag Photo
Download

How to set Origin on a LaserPro Mercury or Venus
Download

How to Upgrade the Firmware on the Mercury
Download

How to Update the Print Driver on Windows XP
Download

LaserPro DirectPrint MAC AI Plug-In User Manual CSX
Download

Movies

Instructions for proper cleaning of the Mirrors and Lenses. Remember there are 4 mirrors, at least 1 Focus lens, and an optic on the end of the actual laser. The red beam mirror requires no special attention and is not counted as one of the above 4 mirrors. The mirrors are gold plated silicone and should be treated very carefully to avoid damage. The only way to damage a laser optic is by not cleaning when dirty, or by cleaning improperly.
Download

How to use the Rotary Attachment using Center Home. Part 1 the Software setup portion.
Download

How to use the Rotary Attachment using Center Home. Part 2 the Hardware setup portion. Your model may be different then shown, but the instructions are the same for all models.
Download

How to release, and seat the X Motor Cable Connection for X PCB and Main Board.
Download

Power Settings

Power and Speed Starting Point for various materials for all models and wattage’s.
Download