X500II Specifications
|
X500II |
|
Wattage |
80W |
100W |
130W |
150W |
Laser Source |
Sealed CO2 Laser |
Cooling |
Water Cooled |
Working Area |
51.1 x 36.1 in. (1300 x 916 mm) |
Max. Part Size (W x L x H) |
All doors closed |
53 x 36 x 1.9 in. (1346 x 914 x 50 mm) |
All doors closed |
53 x ∞ x 1 in. (1346 x ∞ x 25 mm) |
Dimensions (W x L x H) |
74.8 x 55.1 x 47.2 in. (1900 x 1400 x 1200 mm) |
Drive |
Closed-loop DC servo control |
Maximum Motor Speed |
40 IPS |
Speed Control |
Adjustable from 0~100% (Up to 16 color-linked speed settings per job) |
Power Control |
Adjustable from 0~100% (Up to 16 color-linked power settings per job) |
Z-Axis Movement |
Manual |
Resolution (DPI) |
Available 125, 250, 300, 500, 600, 1000 |
Computer Interface |
Standard printer port and USB 2.0** port |
Lens |
2″ or 4” focal lens in enclosed lens carriage |
Display Panel |
4-line LCD panel showing current file name, total working time, laser power, engraving speed, file(s) loaded into memory buffer, setup and diagnostic menus. |
Safety |
Class I Laser Product Complies with EN60825
Class II Laser Product Complies with CDRH |
Cutting Table |
Knife-shaped cutting table with dust collecting tray |
Facility Requirements |
|
Operation Voltage |
AC220V/15A |
Power Consumption |
1250W |
1250W |
2000W |
2000W |
Air Exhaust System |
External exhaust system required to connect to 8-inch opening on machine
(Air volume) (free flow 1400 m3/h, static pressure 2700 pa) |
*Speed is not equal to throughput. See dealer or visit www.GCCworld.com for more details.
** File transmission at USB 2.0 Full Speed rate.
Specifications are subject to change without prior notice. |