×

Call Us: 866-4-LAZERS (SALES)
Support: 951-496-3710

C180 II

Drivers

C180 II Firmware Complete version 1.03-01. Extract to C Drive, and it will make a folder called LaserPro. Instructions and all required will be in the folder.

Drivers

C180 II Firmware Complete version 1.03-01. Extract to C Drive, and it will make a folder called LaserPro. Instructions and all required will be in the folder.
Download

C180 II Print Driver v4.03-02 for all versions of Windows. With C180 II on and connected to PC, double click .exe file for automatic installation and configuration.
Download

C180 II Firmware v1_04_03. Only for machines with New Style (RED) Main Board SN N52225 or Newer only. Extract to C Drive, and it will make a folder called LaserPro. Instructions and all required will be in the folder.
Download

Instructions

Manual Focus Tool Chart
Download

Proper Location of Lens in the Lens Carriage
Download

Adjusting Laser Tickle Pulse. This will need to be done if at the extreme beginning, and end of the raster passes, a single pixel is visible on your material. This effect is most noticeable on Gold and Black engraving plastic.
Download

How to set Origin with the Red Beam as a reference
Download

How to set Origin with Calipers. Only use Red Beam method if you do not have calipers for precision measurement.
Download

C180 II User Manual. Do not operate machine without reading complete manual.
Download

How to Upgrade the Firmware. These instruction will also be in the firmware download once unzipped.
Download

LaserPro DirectPrint MAC AI Plug-In User Manual CSX
Download

Photo of the X Flag. If yours had been broken off, download the CDR file to create a new one. The flag file varies by model. Please insure you download the flag file from the correct machine page in support.
Download

Instructions on how to install and configure your LaserPro Print driver, and USB port connection.
Download

Instructions on how to install and configure your LaserPro Print driver when connected via Ethernet port connection.
Download

Movies

Instructions for proper cleaning of the Mirrors and Lenses. Remember there are 4 mirrors, at least 1 Focus lens, and an optic on the end of the actual laser. The red beam mirror requires no special attention and is not counted as one of the above 4 mirrors. The mirrors are gold plated silicone and should be treated very carefully to avoid damage. The only way to damage a laser optic is by not cleaning when dirty, or by cleaning improperly.
Download

How to use the Rotary Attachment using Center Home. Part 1 the Software setup portion.
Download

How to use the Rotary Attachment using Center Home. Part 2 the Hardware setup portion. Your model may be different then shown, but the instructions are the same for all models.
Download

How to release, and seat the X Motor Cable Connection for X PCB and Main Board.
Download

Power Settings

Power and Speed Starting Point for various materials for all models and wattage’s.
Download

Download

C180 II Print Driver v4.03-02 for all versions of Windows. With C180 II on and connected to PC, double click .exe file for automatic installation and configuration.
Download

C180 II Firmware v1_04_03. Only for machines with New Style (RED) Main Board SN N52225 or Newer only. Extract to C Drive, and it will make a folder called LaserPro. Instructions and all required will be in the folder.
Download

Instructions

Manual Focus Tool Chart
Download

Proper Location of Lens in the Lens Carriage
Download

Adjusting Laser Tickle Pulse. This will need to be done if at the extreme beginning, and end of the raster passes, a single pixel is visible on your material. This effect is most noticeable on Gold and Black engraving plastic.
Download

How to set Origin with the Red Beam as a reference
Download

How to set Origin with Calipers. Only use Red Beam method if you do not have calipers for precision measurement.
Download

C180 II User Manual. Do not operate machine without reading complete manual.
Download

How to Upgrade the Firmware. These instruction will also be in the firmware download once unzipped.
Download

LaserPro DirectPrint MAC AI Plug-In User Manual CSX
Download

Photo of the X Flag. If yours had been broken off, download the CDR file to create a new one. The flag file varies by model. Please insure you download the flag file from the correct machine page in support.
Download

Instructions on how to install and configure your LaserPro Print driver, and USB port connection.
Download

Instructions on how to install and configure your LaserPro Print driver when connected via Ethernet port connection.
Download

Movies

Instructions for proper cleaning of the Mirrors and Lenses. Remember there are 4 mirrors, at least 1 Focus lens, and an optic on the end of the actual laser. The red beam mirror requires no special attention and is not counted as one of the above 4 mirrors. The mirrors are gold plated silicone and should be treated very carefully to avoid damage. The only way to damage a laser optic is by not cleaning when dirty, or by cleaning improperly.
Download

How to use the Rotary Attachment using Center Home. Part 1 the Software setup portion.
Download

How to use the Rotary Attachment using Center Home. Part 2 the Hardware setup portion. Your model may be different then shown, but the instructions are the same for all models.
Download

How to release, and seat the X Motor Cable Connection for X PCB and Main Board.
Download

Power Settings

Power and Speed Starting Point for various materials for all models and wattage’s.
Download